Additional of the object

The "Additional" tab consists of the following fields:

• Overspeed. The choice of method for determining speeding. Exceeding the speed can be viewed in reports on speeding, as well as when viewing a track. 
  • A method for determining the overspeed. Method for determining excess speed.
    • Fixed limit. If you receive messages at a speed greater than the value indicated in the "Overspeed limit, km/h" field and the minimum time for exceeding the speed specified in the field "Min.timeout of overspeed, seconds", speeding will be recorded.
  • Overspeed limit, km/h. Limitation of speeding in km/h.
  • Min.timeout of overspeed, seconds. The minimum time to exceed the speed in seconds. 
• Color of the label to the object.
  • Color of the label to the object. By default, the color of the object's signature on the map is red. It is possible to set a different color. 
• Permanent track color.
  • Use fixed track color. Flag using constant color when building tracks. 
  • Permanent track color. Selection of the color for track.
• Filtering position information of the object in messages. All messages from the object are recorded in the database. But in the case of data releases, the errors of the GPS receiver may distort the mileage count and various indications in the reports. In this case, you can enable the filtering of information about the position of the object in the messages. 
  • Enable position filtering of the object in messages. Flag for enabling filtering of information about the position of the object in messages. 
    • Ignore invalid messages. Flag for ignoring invalid messages. Some device models send a coordinate validity flag. 
    • Minimum number of satellites. To enable the number of satellites check, set the flag and enter the minimum number of satellites. 
    • Maximum value of HDOP. HDOP - horizontal error. The smaller the value, the more precise the coordinates. To enable HDOP verification, set the flag and enter the maximum HDOP value. 
    • Max.speed value, km/h. To enable the speed check, set the flag and enter the maximum speed in km/h.